Wake On Lan 1.0.6 May 2026

Provides a history or status of the last "wake" attempt to confirm if the command was sent successfully.

The computer must be connected via an Ethernet cable, as many older Wi-Fi adapters do not support WOL in a powered-down state. How It Works

Enable "Wake on Magic Packet" in the Network Adapter properties via the Device Manager. Wake on Lan 1.0.6

Allows for quick access and control without opening a full application window.

Ensure Wake for network access is checked in System Settings under Energy Saver or Battery. Provides a history or status of the last

The application sends a to the target's MAC address. This packet typically uses UDP ports 7 or 9 to signal the motherboard's network controller to trigger a system boot. While primarily used on local networks, it can be configured for "Wake on WAN" (remote internet waking) if your router supports subnet-directed broadcasts. AI responses may include mistakes. Learn more Wake-on-LAN: Access PCs from sleep mode | TeamViewer

is a utility for macOS designed to boot up networked computers and devices remotely by sending "Magic Packets." This specific version is often used by Mac users to manage multiple devices directly from their menu bar. Key Features of Version 1.0.6 Allows for quick access and control without opening

To successfully use Wake on Lan 1.0.6, your target hardware and network must be configured: