C-FIX
For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry.
C-FIX
Scania Gr.A lepidas v8 sound 1.43

C-FIX-Online 

Includes current design standards, e.g. EN 1992-4 and EOTA TR 054 for the dimensioning of steel and bonded anchors in concrete as well as injection systems for anchoring in masonry. The anchor design in concrete can be performed either assuming a rigid base plate following a linear strain distribution or considering realistic stiffness conditions using a spring modeling approach.

Go to C-FIX online

Scania Gr.A lepidas v8 sound 1.43

Advantages C-FIX Online:

  • The calculation of the anchor forces is performed in the software.
  • The stiffness of the base plate can be verified
  • Easy optimizing of the anchorages is possible
  • Multiple load cases can be defined and designed
  • The profile and the stiffeners are also considered for the calculation
  • The realistic deformations and stresses are shown
  • The FEM Design can be used also to check existing anchorages
  • Optionally, it is possible to perform the base plate design by checking the steel stress in all parts of the connection, as well as the welds, hole bearing resistance and concrete compression below the base plate
 

 

Scania Gr.A lepidas v8 sound 1.43

Scania Gr.a Lepidas V8 Sound 1.43 ⭐ Premium

Slav Jerry (with samples from Kriechbaum and Alexander Swift) . Key Features:

Includes sound attenuation for realistic distance fading, as well as directional and distortion effects based on the camera angle .

(default: J ) for slightly over 1 second (between 1 and 1.5 seconds) . Release the button , and the exhaust tone will switch . Scania Gr.A lepidas v8 sound 1.43

This feature may not work if other mods that replace interior sound files are active .

Allows drivers to switch between a deep tone and a "crackle" tone using a manual toggle . Slav Jerry (with samples from Kriechbaum and Alexander

The mod is designed to work with both official SCS trucks and popular community mods: R, S (Next Gen), and Streamline models .

2.0 (specifically rebuilt for 1.43 compatibility) . Release the button , and the exhaust tone will switch

Features a gearbox whine, retarder sounds, and Opticruise shifting effects .

Your time is valuable

The FEM calculation tool provides you with further information to design a sufficiently stiff base plate. It is no longer necessary to switch between the anchor design software C-FIX Online and a finite element software for the base plate calculation and design. This feature is a real time-saver!

Go to C-FIX online

Scania Gr.A lepidas v8 sound 1.43

C-FIX Offline

In addition to all current design standards C-FIX Offline includes also the verification according to „ENSO“ (Engineering Solution) which allows the calculation of extended design models that are possible according to fib. Furthermore, the module settings can be individually adapted to the local requirements.

To the offline version

Scania Gr.A lepidas v8 sound 1.43

Advantages C-FIX Offline

  • Design of injection systems in masonry.
  • Design under dynamic actions - threshold or alternating loads.
  • Design under seismic action (earthquake).
  • Measurement under extraordinary stress.
Scania Gr.A lepidas v8 sound 1.43

Download and System requirements FiXperience-Offline

Downloads

Online Installer (individual position version)

MSI Network-package for administrators (network-version)​

Offline Installation (CD Version)

System requirements

Main memory: Min. 8 GB
Operating systems:  Windows® 10, Windows® 11
Processor: x64-based processor (ARM processors are not supported)
Note: The current system requirements may vary based on your system configuration and your operating system.

cd-blue-75b965665c-62mfm