Flashing firmware will wipe all internal eMMC storage. Ensure your device has at least 50% battery before starting to prevent an accidental shutdown during the write process.

How to Download and Install ATM30 PB801 Firmware (1366x768 | 4GB | Iconic eMMC)

Connect your device via USB (ensure it is powered off or in download mode) and begin the flashing process. ⚠️ Important Note

Most PB801 devices use a specific flash tool (like PhoenixCard or SP Flash Tool). Load the extracted .img or scatter file.

This sounds like you’re looking for a firmware or a recovery image for an device (likely a tablet or an All-in-One PC based on the 1366x768 resolution and eMMC specs).

Large firmware files are often split into multiple parts to ensure stable downloads. You will need (Part 1, Part 2, etc.) in the same folder before you can extract them. File Name: ATM30_PB801_1366X768_4GB_ICONIC_EMMC_part2.rar Format: Compressed RAR Archive Tools Needed: WinRAR or 7-Zip 🚀 How to Install

If you are looking to unbrick your device or perform a clean factory reinstall, having the correct firmware is essential. The model, specifically the version featuring the 1366x768 resolution and 4GB RAM , requires specific files to ensure the hardware and eMMC storage communicate correctly.