Install (64-bit) or use libusb-win32 to install a device filter for the MediaTek USB port. Run the Utility :
Install (64-bit) and ensure you check the box "Add Python to PATH" during setup.
Open , go to "Options" > "Connection," select UART , and choose the corresponding COM port. You can now proceed to flash your firmware as usual. Key Considerations Descargar MTKAuth Bypass ToolV30 Firmware4mobile com rar
: If the device keeps disconnecting, try a different USB cable or port, or ensure the libusb filters are correctly applied to the MediaTek port.
The is a utility designed to disable Secure Boot (SLA) and Download Agent Authentication (DAA) on MediaTek-based Android devices. This allows you to flash firmware, remove FRP (Google) locks, or perform service tasks using tools like SP Flash Tool without needing an official authentication file. How to Use the MTKAuth Bypass Tool Install (64-bit) or use libusb-win32 to install a
Install required libraries by opening a command prompt and typing: pip install pyusb json5 .
Hold the , Volume Down , or both buttons (depending on the model) and connect it to the PC. If successful, the tool will say "Protection disabled" . Flash Firmware : Keep the phone connected. You can now proceed to flash your firmware as usual
To successfully use the tool on Windows, follow these standard steps derived from the Hovatek community and GitHub sources : :