This connector handles the primary power and signal light functions. Output for turn signals (right side). White (+): Output for turn signals (left side).
Siren output; connect to the red wire of the siren. Secondary Connections (11-Pin Connector)
Used to temporarily disable the alarm for servicing. To enter, turn the ignition on and press the Valet switch once. aps 1350 shema podkljuchenija
Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits.
Power for the internal relay of the turn signals; connect to +12V (fused). This connector handles the primary power and signal
Ignition sensing; connect to the terminal that receives +12V only when the ignition is on.
Green/White (NC), Blue/White (COM), Yellow/White (NO). Programming Tips Siren output; connect to the red wire of the siren
To pair a new replacement remote , turn the ignition on, press the Valet button 3 times, then hold button 1 on the remote until the siren chirps.