: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.
Set the output device to the correct found in your computer's Device Manager. Ensure the Baud Rate is set to 9600 . VinylMaster Setup :
model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut 721-.rar
: You may need FTDI VCP drivers available from FTDI Chip to allow the OS to send commands via USB. 3. Software Configuration
If you are using the USB connection, you must install the proper drivers to create a virtual COM port. : Use the arrow keys on the cutter's
or depending on the model version) from the manufacturer or reseller site like ukoter.co.uk.
recommend using a serial connection or a high-quality adapter like the for better reliability. 2. Driver Installation VinylMaster Setup : model and choose "Direct USB"
: Always use the "Test" button on the cutter or the "Area Test" in your software to ensure the carriage moves correctly before wasting material. Vinyl U.S. Cutter set up MH 721-MK2 28"